Techniks Perske DIN 6388 Collets and Nuts

Manufacturer Index

Home > Techniks > Tool Holding > Collets

Techniks Perske DIN 6388 Collets

These collets and collet nuts conform to DIN 6388 standards and are popular in the woodworking industry on Perske Motor Spindles.

Snap collet into the nut before screwing nut onto spindle or collet holder.

Left hand collet nuts available upon request.

Collet Dimensions:

Dimension	EOC 08	SYOZ 20	EOC 16	SYOZ 25
Length	26mm	34mm	40mm	52mm
Outside Dia.	14.4mm	20mm	25.5mm	35mm

Collet Nut Dimensions:

Dimension	EOC 08	SYOZ 20	EOC 16	SYOZ 25
Length	19mm	20mm	24mm	30mm
Outside Dia.	30mm	35mm	43mm	60mm

Available Sizes and Part Numbers:

Shank Diameter	EOC 08	SYOZ 20	EOC 16	SYOZ 25
1/8"	03508-1/8	03520-1/8	03531-1/8	03868-1/8
3/16"	03508-3/16	03520-3/16	03531-3/16	03868-3/16
1/4"	03508-1/4	03520-1/4	03531-1/4	03868-1/4
5/16"	03508-5/16	03520-5/16	03531-5/16	03868-5/16
3/8"		03520-3/8	03531-3/8	03868-3/8
7/16"		03520-7/16	03531-7/16	03868-7/16
1/2"		03520-1/2	03531-1/2	03868-1/2
9/16"			03531-9/16	03868-9/16
5/8"			03531-5/8	03868-5/8
3/4"				03868-3/4
7/8"				03868-7/8
1"				03868-1
10mm			03531-10	03868-10
16mm			03531-16	03868-16
20mm				03868-20
25mm				03868-25

Nuts and Wrenches:

Description	EOC 08	SYOZ 20	EOC 16	SYOZ 25
Nut	03508	03520	03636	03638
Wrench		22220		03691

Copyright © 2001-2011 CTS Co. All rights reserved.